The SPB 6-20 is installed on rubber wheels, which make its travel easy on any job site. It is undoubtedly the best solution for small- and medium-sized projects. The SPB benders also feature oversized cylinders for better control of the bending process.

Specifications

Compressor Engine
Engine Model

C-2.2

Displacement

2.2 liters

Number of Cylinders

4

Featured
Horsepower

32 kW / 42 HP

Operating Weight

11,244 lbs / 5,100 kg

Engine
Engine Model

C-2.2

Horsepower

32 kW / 42 HP

Net Flywheel Power (DIN 6271)

49 HP

Governed Speed

2,600 rpm

Displacement

2.2 liters

Number of Cylinders

4

Sound Proofing Type

Yes

Hydraulic Winch
Max. Pull At First Layer

9,700 lbs / 4,400 kg

Hydraulic Motor

Orbital DANFOSS

Frame

Aluminum allow + ductile cast iron

Reduction Gear

With worm screw, irreversible

Neutral

Manual

Max Operating Pressure

3480 psi / 240 bar

Maximum Feed Flow Rate

16 U.S. gal/min – 60 L/min

Speed at First Layer

16 ft/min – 4,85 m/min

Recommended Cable Diameter

1/2 inch / Ø 10mm

Wire Rope Type

6 strands with textile core

Hydraulic Pump
Maximum Flow Rate

26 U.S. gal/min – 100 L/min

Maximum Constant Pressure

3,626 psi / 250 bar

Maximum Peak Pressure

4,351 psi / 300 bar

Front Cracking Wheel
Hydraulic Motor

Orbital DANFOSS

Hydraulic Tank
Hydraulic Oil Tank Capacity

30 U.S. gal / 112 L

Hydraulic Oil Tank
Hydraulic Oil Tank Capacity

30 U.S. gal / 112 L

Cartridge Type

Donaldson

Control Valve
Control Valve Brand

Walvoil

Spools

N.5

Fuel Tank
Fuel Tank Type

Metal work with filter

Features

Roll over the red circles to view features.

Pipebender

Cabin

Optional Cabin

Available on select models, this cabin is insulated and can be fitted with A/C or heater as part of our winterization package.

Platform

Operator’s Platform

Placed opposite the engine for maximum comfort and great visibility.

Winch

Hydraulic Winch

Pulling capacity ranging from 3,000 to 10,000 kg.

Hydraulic System

Load-sending variable pump and a five-spool proportional valve, allowing safer, faster and precise control.

Tracks

Tracks

Caterpillar-type crawler undercarriages with triple grouser bars on industrial-grade shoes.

Gallery

Accessories

Mandrels

Mandrels

Model Pipe Range Weight

Line-up Clamps

Clamp

Model Pipe Range Weight

Bending Sets

Bending Set
Each bending set will fit one pipe size only and it includes: a stiff back liner; a bending die; two pin-up clamp liners; and a pin-up liner.

Bending sets are available bare or with linings to accommodate special conditions and non-standard pipe or coating. Standard bending sets will accommodate pipe manufactured to API-5L.

The largest pipe size in a given pipe bending machine range requires a bending die only.