SP-250

Rent Buy New

The SP-250 has all the features the SP-350 has but in a smaller frame. It is ideal for pipe sizes from 4 to 16 inches or job sites where accessibility is limited due to transportation or permit constrictions. It is also a popular model on renewable energy jobs.

Specifications

Compressor Engine
Engine Model

C-7 ACERT

Displacement

7.2 L – 442 cu in

Engine
Engine Model

C-7 ACERT

Horsepower

184 kW / 250 HP

Net Flywheel Power (DIN 6270)

250 HP – 184 kW

Governed Speed

2,100 gpm

Displacement

7.2 L – 442 cu in

Hydraulic System
Main Pumps

Bosch-Rexroth, -2 Independent Hydrostatic Variable Pumps Travel

HS Max Operating Pressure

420 bar – 6,090 psi, -1 hydrostatic variable pump escalator

Transmission
Transmission Type

Hydrostatic

Transmission Motors

Pistons Disappearing Into The Track Flames Brakes Integrated Negative Control

Final Drives

Epicycloidal Oil Soaked

Controls
Safety Controls

Emergency shut-off

Track Frame
Salt Track Chain Pitch

171.45 mm – 6.75 in

Lower Track Roller Area

37,950 cm²

Lower Track Rollers

9 per side

Upper Track Rollers

2 per side

Length Of Track On The Ground

3,450 mm – 136 in

Standard Shoes Width

550 mm – 22 in

Gauge

2,000 mm – 79 in

Track Shoes

52 per side

Pressure On The Ground

0.77 kg/cm²

Fluid Capacities
Fuel Tank

365 L – 96 U.S. gal

Hydraulic System Circuit

600 L – 158 U.S. gal

Escalator
Vertical Adjustment

Minus 11 inches to plus 4 ft

Shoes Width

1,000 mm – 40 in

Chain Adjusters

Hydraulic

Front Cracking Wheel
Number Of Wheels

2

Lifter

1 Hydraulic Cylinder

Number Of Tools

6

Screen
Interchangeable Screen Mesh

1/2" to 4"

Screen Width

1,206 mm – 47.5 in

Screen Length

2,337 mm – 92 in

Area

30 sq ft – 2.78 m²

Number Of Decks

1

Screen Maximum Feed Size

500 mm – 20 in

Screen Hydraulic Motor

1 Orbital Type

Conveyor Belt
Conveyor Belt Type

Rubber

Conveyor Belt Width

600 mm – 24 in

Conveyor Belt Length

3,900 mm – 12.8 ft

Variable Speed

0 – 420 m/min

Rotation Capabillity

Reversible

Conveyor Belt Transmission

Hydraulic Variable Speed

Electric System
Operating Voltage

24 V

Supplied Batteries

2

Starter Capacity

7.5 Kw

Alternator

60 A

Features

SPD-250

Conveyor

Reversible Conveyor

Can be used on either side of machine and folds into 3 parts for ease of shipping.

A hydraulically-controlled dowel adjusts the angle and distance at which the material is placed back into the trench. 

Adjustable Sections

The front and rear sections can adjusted hydraulically to compensate for different terrain gradients.

Insulated Engine

Insulated Engine

Engine compartment reduces noise to comply with EU noise limit requirements.

ROPS

Optional ROPS

In addition to being required in many countries, ROPS increases safety for the operator.

Cabin

Oscillating Cabin

Hydraulically slides out to either side of the machine to increase visibility.

Control Panel

Control Panel

The controls are duplicated on both sides of the cabin for ease of operation on either side of the trench.

Gallery